NAVIGATION
Home
Classifieds
E-mail List
Events Calendar
First Flights
Join Chapter 72!
Members
Minutes
Newsletters
Officers
Projects
Tech Corner
Young Eagles
00V Weather Station:
Details  |  Location
Local Weather:
AvWx  |  TAF  |  General
 
LOCAL CLUBS
IAC Chapter 5
Van's Air Force
Meadow Lake Squadron
 
CO EAA CHAPTERS
Denver - 43
Denver - 301
Ft. Collins - 515
Longmont - 648
Pueblo - 808
Crested Butte - 881
Durango - 997
Buena Vista - 1161
Granby - 1267
 
FLIGHT PLANNING LINKS
Colorado Airports
CO AWOS Stations
EAA Flight Planner
 
NATIONAL LINKS
EAA National
Aerobatic Club
Flight Instructors
Ultralights
Vintage Aircraft
Warbirds
Young Eagles
 
OTHER LINKS
$100 hamburger
AOPA's Sky Spotter
ePanel Builder
Equipped To Survive

All content ©
EAA Chapter 72
Please report broken links to our Web Editor

Bill of materials for one 3' x 8' work table

1 3/4" x 4' x 8' particle board - ripped to 3' x 8' sheet
1 1/2" x 4' x 8' particle board - ripped to 3' x 90" sheet
10 2" x 4" x 8' Premium Studs
#8 x 2 1/2" Wood Screws
Carpenter's Wood Glue
You will be building the table upside down from the top down.  make the top frame first, it will be small enough to allow the table top to overhang the frame by 1 1/2" all the way around.  The lip is good for clamping things to it.  Then put the particle board top on.  Turn it over and attach the legs and shelf braces (leave the 8" bottom outer leg  pieces uncut until the end and cut them to fit), then turn it over and put the shelf in...
2x4 #

Cut to lengths
1 93            
2 93            
3 90            
4 90            
5 30 30 33        
6 30 30 33        
7 30 30 33        
8 30 30 33        
9 30 18 18 18 8    
10 18 8 8 8      

Fully assembled work table
 Assembled work table without plywood
Exploded table top
Table legs
Exploded lower shelf